GetDataBack
Do-it-yourself Data Recovery Software

GetDataBack is more than an undelete or file recovery program or a system restore:
[color="red"]Whatever happened to your drive-[/color]
[color="blue"]
GetDataBack will recover your data if the hard drive's partition table, boot record, FAT/MFT or root directory are lost or damaged, data was lost due to a virus attack, the drive was formatted, fdisk has been run, a power failure has caused a system crash, files were lost due to a software failure, files were accidentally deleted...[/color]
[color="red"]
Recover even when Windows doesn't recognize the drive-[/color]

[color="blue"]GetDataBack can even recover your data when the drive is no longer recognized by Windows. It can likewise be used even if all directory information - not just the root directory- is missing.
[/color]
[color="red"]Get everything back-
[/color]
[color="blue"]Advanced algorithms will make sure that all directories and sub directories are put together as they were, and that long file names are reconstructed correctly.[/color]

[color="red"]GetDataBack is safe-[/color]

[color="blue"]GetDataBack is read-only, meaning the program will never attempt to write to the drive you are about to recover. Please make sure to read the safety instructions...[/color]

[color="red"]GetDataBack is easy to use-[/color]

[color="blue"]The software enables the regular user to conduct his own data recovery by guiding him through three easy to understand steps, thus gives the advanced user the possibility to interfere with the recovery and improve the results, by examining the scan log, the file system details, file and directory information, by selecting the sector range to be scanned, by choosing excessive search for file systems or search for lost files, by calling Runtime's DiskExplorer.[/color]

[color="red"]Recover files over your local network or over a serial cable-[/color]

[color="blue"]This feature enables you to run GetDataBack on one computer ("remote") while accessing the drives of another computer ("host").

Recovering data over a network is useful, especially when you are not able to remove the drive you want to recover from and attach it to another computer.[/color]

[color="red"] GetDataBack recovers from[/color]

[color="blue"] * Hard drives (IDE, SCSI, SATA)
* USB drives
* Firewire drives
* Partitions
* Dynamic Disks
* Floppy drives
* Drive images
* Zip/Jaz drive
* Compact Flash Cards
* Smart Media Cards
* Secure Digital Cards
* USB Flash Drive
* iPod Disks[/color]

[color="blue"]
GetDataBack for NTFS V3.30.001[/color]

Use GetDataBack for NTFS to recover files from drives with NTFS file system. GetDataBack for NTFS can be installed and runs under Windows 95/98/ME/NT/2000/XP/2003/Vista.

System Requirements:
Pentium Processor
32 MB RAM
Windows 95, 98, ME, NT, 2000, XP, 2003 or Vista


[color="blue"]GetDataBack for FAT V3.30.001[/color]

Use GetDataBack for FAT to recover files from drives with FAT12/16/32 file systems. GetDataBack for FAT can be installed and runs under Windows 95/98/ME/NT/2000/XP/2003/Vista.

System Requirements:
Pentium Processor
32 MB RAM
Windows 95, 98, ME, NT, 2000, XP, 2003, Vista

- Important Installation Note -

Do not install GetDataBack on the drive you want to recover! It is strongly recommended to proceed as follows:

Install the program to another computer, which doesn't have any problems. If you have a choice, choose the computer with the most RAM and is the fastest. Attach the drive you want to recover as a slave to this machine. Make sure the drive is jumpered correctly and is recognized by the BIOS.

After downloading GetDataBack run the setup.exe. The setup Wizard will guide you through the installation process

No comments